Confronted by the choice of :
1. Support board Neiqiang aperture D 1 =d+ ≈ 0.1d. (for integer), which d= wires, cables, liquid, gas hoses Waijing.
2. According to the support boards to determine chain Neiqiang largest aperture Dmax high hg boards and confronted models Tlxx.
3. According confronted support functions required to determine patterns and confronted the board bending radius :
1) When confronted to hold larger pipes, cable loads, should use high-intensity support board I type. (a block of)
2) When the control cables to the control panels Neiqiang aperture size may be greater than for the regular port, maintenance, etc., may choose to support panels II. (a separate type of support panels.
3) installation of cables specifications more varieties, may choose to support board-III. (Framework Type)
4. According to the installation of cables to determine the amount of support the board width B 1 And thus available confronted width B.
5. Or by the use of environmental impact tore occasions, the need for protection and support of harmonic panels, with 209,000 requests otherwise. |
|
Note : If permitted to go beyond the length of towing supports round, supports the proposed increase in the towing roller below, and to ensure that tore sink confronted with the best mobile performance.
Cases : TL65 confronted, 20kg/M additional load, length of less than 3.6M, confronted not allow supports round. |
Marking significance
Hydraulic control flexibility status :
We should pay attention to, hydraulic pressure control will stretch or shorten, therefore, should take into account the practices of flexibility factor, especially in high-pressure and confronted a longer length of the case should be brought to attention. |
For orders
TL95 confronted models supporting board-III, bending radius R=250, support board width B 1 =300, towing length L=3325.
Confronted TL95III=250 x 300 x 3325
 |
|
